Asoni CAM616M Manual do Utilizador

2 Mega-Pixel H.264 CMOS Network Camera CAM616M / CAM616M-PoE User’s Manual Date: 7/20/2012 Firmware Version: V1.0.32

9 C. IP Assignment  Always consult your network administrator before assigning an IP address to your camera in order to avoid using a previously

10 2. IP Search searches all the network devices which connect to the intranet and lists on the window. Click [Search] button to search again. 3.

11 4. Live Video Start the IE browser, type the IP address of the network camera in the address field: http://<IP of camera> If the “HTTP Po

12 1 2 3 4 5 When popup the following dialogue box, click [Yes].

13 The web page of the device shows as following. If you are using IE 8.0 or above, please click “Compatibility View” icon to make this web page w

14  Online Visitor : Shows how many users connect to this network camera.  Function Buttons : Click these buttons will perform the following f

15 Relay Out (ON/OFF Switch) : Click the button to manually turn on / off the Relay via the built-in Digital Out. Relay Out (Time Switch) : Cl

16 5. Configuration Click [Configuration] button to get into the configuration page. Click [Live View] button to back to the Live-View page. A

17 Server Information MAC Address: The MAC address of the Ethernet network card in the device. Server Name: You can type a name into this field t

18 Time Setting Date Format: Select the format to display the date. Time Zone: Select the GMT to match your time zone. Enable Daylight Saving: I

1 Content Content ...

19 The date and time remain the same: Keep the current date and time without change. After set up, click [Apply] to save the settings.

20 User Management You can add, remove and manage the users in this page. This device supports 3 user groups:  Administrator: The administrator

21 Edit: To change the username and password, click [Edit] and modify the administrator or user in the pop-up window. Remove: To remove the us

22 System Upgrade This page allows user to upgrade firmware, restart device and restore the factory default settings. Firmware Upgrade The firm

23 System Logs System Status Logs Click the [View] button on the right side to list the logs of system status. Motion Trigger Logs Click the [V

24 B. Video/Audio Setting Video Format This device supports H.264/MJPEG and MPEG4 (only for 3GPP streaming) Triple Mode and Triple Streaming, set

25 Original Video Original Video: Select the Original Video from the pull-down list. The Original Video will affect the selection of Resolution an

26 Video System: Select NTSC-60Hz or PAL-50Hz to match your local video system. TV Output: Select the video system of the analog video output sign

27 3GPP Streaming Output Setting After enable the 3GPP streaming, it will enable this device to send out the video in 3GPP format, and you can vi

28 After set up, click [Apply] to save the settings.

2 Connects to PC Directly ... 51 Connects to an

29 Image Setting Privacy Mask For the security purpose, there are 3 areas can be setup for privacy masks, the masked areas will not be shown in

30 video. Automatic Gain Control: Adjust this function according to the environment. Backlight Compensation: This device supports “Back Light Comp

31 Audio Setting This device supports 2-way audio. Audio from Device to Local PC For this device to local PC, select [Enable] and then click [Appl

32 C. Network Setting Network Setting Network Setting

33 IP Assignment DHCP: If this device behinds a router and the router provides DHCP service, using DHCP, this device will get all network paramete

34 RTSP Server Setting RTSP Server: The video stream can be direct retrieve via RTSP connection, you can close this function by disable this optio

35 keeping the RTSP connection, this device will terminate the RTSP connection. If select “Disable”, this device will always keep the RTSP connect

36 Mail / FTP / Samba Setting To send out the event video to E-mail, FTP or Samba network storage, please set up the configuration first. Mail

37 Mail Setting Login Method: This device provides 2 kinds of mail settings. “Anonymous” for the mail server which doesn’t need login with user n

38 FTP Port: The port of the FTP service. Default is 21. Store Path: The path to save the sent video file. FTP Mode: Select “PORT” or “PASV to fit

3 1. Preface This camera is a professional 2 Mega-Pixel CMOS network camera which builds in web server. User views real-time video via IE browser.

39 PPPoE Setting If this device connects to an ADSL modem directly and want to use PPPoE connection, set the parameters in this page. PPPoE Con

40 DDNS Setting This device supports DDNS, set the parameters in this page. DDNS Setting There are several DDNS providers can be selected. Sele

41 Update Failed, check your internet connection: Network connection failed. Update Failed, please check the account information with you provider

42 D. Event Handling Event Setting This device supports multiple event settings. This device supports 2 kinds of event detections:  Motion Det

43 Motion Detection This device allows 3 areas for detect motion. When motion detection is triggered, it can send the video or snapshot to specifi

44  FTP: When the motion detection is triggered in this area, send the recorded video or snapshot to the specific FTP site.  Save to Samba: Wh

45 To detect the smaller moving object, use 3 motion areas to replace a large motion area, refer the figure below: Record File Setting

46 Snapshot (Single): This option is available when the “Video Format” of streaming 1 is set as “JPEG” in Video Format page. When an event (Motion

47 I/O Setting This device provides Digital Input and Digital Output. When the Digital Input is triggered, it can send the video or snapshot to sp

48  The interval time between multiple detections. For example, if the time set to 10 seconds, when the Digital Input is triggered at time 10H:0

4 Use PoE: PoE Injector (IEEE 802.3af) Or, use Power Adaptor: DC 12V, 1A Power Consumption Max. 6 Watt Dimensions W69 x H60 x D151 mm Network Et

49 Schedule This function provides the schedule for the following:  Send Snapshot with the Scheduled Time: automatic send a snapshot to the E-ma

50 light-grey means the time is unselected. Select / Unselect Specific Time: Click the square of the time table to select or unselect the specific

51 6. Network Configuration A. Intranet Only Connects to PC Directly If you want to connect the camera to PC directly for the very first time setu

52 Connects to an Exist LAN If the camera will be used in a local network (LAN) and don’t allow to access via Internet, please refer to the figure

53 B. Internet Only Connects to ADSL with Fixed Public IP Address If the camera connects to Internet with an ADSL modem and the public IP address

54 Connects to ADSL with Floating Public IP Address (PPPoE) If the camera connects to Internet with an ADSL modem and the public IP address of ADS

55 After enable the DDNS, assume the registered URL is “test.dyndns.org”, now the camera can be linked with following URLs: Client Link Address

56 C. Intranet + Internet Connects to Internet with Fixed Public IP Address If the camera will be added into a local network (LAN), and will be ac

57  Set Subnet Mask of Router, PC and cameras.  Set Gateway of PC and cameras with the same IP address. The Gateway is the IP address of route

58 Camera 2 With audio: rtsp://60.220.20.250:555/3g Without audio: rtsp://60.220.20.250:555/3gx Connects to Internet with Floating Public IP Ad

5 3. Product Installation A. Hardware Installation Cable Connections  Network Connector: The RJ-45 connector allows connect the Ethernet cable

59 7. Factory Default To recover the default password and other settings, please follow the steps: 1. Power off this device. 2. Use a needle abo

6 the power from the PoE injector or PoE switch. PoE (Power over Ethernet) is a technology that integrates power into a standard LAN infrastructur

7 Digital Input (Alarm Input) GND (Ground): Initial status is LOW. Alarm: Max. 50mA, 12VDC. Relay output COM: Common pin. N.O. (Normally Open):

8 B. Monitor Setting 1. Right-Click on the desktop. Select “Properties” 2. Change color quality to “Highest (32bit)”.